|
We scan, model, and/or CNC
Machine your mold
We
perform 3D model digitizing to establish
and confirm geometric
shapes. If you need
to duplicate a 3D mold or contoured object
we can simplify the process via digital
reconstruction. When we complete digitizing
your object, we
can create your 2D and/or
3D CAD files or Solid Models to
assist in project construction or to have the parts duplicated
in our CNC facilities
*Product must be your
design
3D parts are normally complex and the
information furnished may
not always
be 100% accurate.
To correct these issues we offer 3D Model digitizing to obtain precise measurements on difficult
"gray" areas
LPX-600 Rotary Table
Diameter 254mm (10 in.)
Plane scanning: Width 254mm (10 in.), height 406.4mm (16
in.)
Rotary scanning: Diameter 254mm (10 in.), height 406.4mm (16
in.)
±0.05mm (This figure reflects standard scanning conditions
established by Roland DG.)
|
|
We also use
Pix-Form Pro
Click images to enlarge
Feature recognition and clarification is a
faster and more accurate when using a digitizing
system to analyze contours to establish absolute
geometry and intersection points therefore
increasing accuracy as well as assuring
the desired results
We feature Roland's newest
LPX-600
360 degree non-contact laser
scanner!
Rotary, Planer, and/or 3D Feature digitizing!
If you have unknown geometric
features and need to build an accurate
3D Model we can help you.
Reproduce unusual
undocumented shapes
accurately within your time constraints
We also use probe/CMM type
3D Digitizers made by MicroScribe.
Scanning size and capacity for the
MicroScribe is virtually unlimited
|
|
 |
